Hilti PMP 45, Руководство по эксплуатации

Страница: 7 / 71

2.3 Information displayed during operation
LED The LED doesn’t light. The tool is switched off.
The LED doesn’t light. The batteries are exhausted.
The LED doesn’t light. The batteries are inserted incorrectly.
The LED lights constantly. The laser beam is switched on. The tool
is in operation.
The LED blinks twice every
10 seconds.
The batteries are almost exhausted.
Laser beam The laser beam blinks twice
every 10 seconds.
The batteries are almost exhausted.
The laser beam blinks rapidly. The tool cannot level itself.
2.4 Items supplied with the point laser (cardboard box version)
1 PMP 45 point laser
1 Soft pouch
4 Batteries
1 Operating instructions
1 Manufacturer’s certificate
3 Accessories
Designation
Short designation
Description
Tripod PMA 20
Target plate PMA 54/55
Magnetic holder PMA 74
Telescopic brace PUA 10
Frame clamp PMA 25
Universal adapter PMA 78
Hilti toolbox PMA 62
Laser visibility glasses PUA 60 The laser visibility glasses are not
protective glasses and thus do not
protect the eyes from laser beams.
As the laser visibility glasses restrict
color vision, they should be worn only
when working with this tool. Do not
wear the laser visibility glasses while
driving a vehicle on a public road.
4 Technical data
Right of technical changes reserved.
Range of the points 30 m (98 ft)
Accuracy 1
±2 mm at 10 m (±0.08 in at 33 ft)
Self-leveling time 3 s (typical)
1 Influences such as particularly high temperature fluctuations, dampness, shock, dropping, etc. can affect accuracy. Unless stated
otherwise, the tool was adjusted or calibrated under standard ambient conditions (MIL-STD-810F).
en
3
Printed: 08.07.2013 | Doc-Nr: PUB / 5070108 / 000 / 01