![background image](http://html1.mh-extra.com/html/hilti/pmp-45/pmp-45_operation-instructions-manual_2134862012.webp)
Fault
Possible cause
Remedy
Individual laser beams don’t
function.
The laser source or laser control unit
is faulty.
If necessary, have the power tool re-
paired by Hilti Service.
The tool can be switched on but
no laser beam is visible.
The laser source or laser control unit
is faulty.
If necessary, have the power tool re-
paired by Hilti Service.
The temperature is too high or too
low.
Allow the tool to cool down or warm
up.
Automatic leveling doesn’t func-
tion.
The tool is set up on an excessively
inclined surface.
Set up the tool on the level.
The tilt sensor is faulty.
If necessary, have the power tool re-
paired by Hilti Service.
10 Disposal
WARNING
Improper disposal of the equipment may have serious consequences:
The burning of plastic components generates toxic fumes which may present a health hazard.
Batteries may explode if damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or
environmental pollution.
Careless disposal may permit unauthorized and improper use of the equipment. This may result in serious personal
injury, injury to third parties and pollution of the environment.
Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking
back old tools or appliances for recycling. Ask Hilti Customer Service or your Hilti representative for further information.
For EC countries only
Disposal of electric tools together with household waste is not permissible.
In observance of European Directive 2012/19/EU on waste electrical and electronic equipment and its
implementation in accordance with national law, electrical appliances that have reached the end of their
life must be collected separately and returned to an environmentally compatible recycling facility.
Dispose of the batteries in accordance with national regulations.
11 Manufacturer’s warranty
Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid so long
as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
Operating Instructions, and the technical system is main-
tained. This means that only original Hilti consumables,
components and spare parts may be used in the tool.
This warranty provides the free-of-charge repair or re-
placement of defective parts only over the entire lifespan
of the tool. Parts requiring repair or replacement as a
result of normal wear and tear are not covered by this
warranty.
Additional claims are excluded, unless stringent na-
tional rules prohibit such exclusion. In particular, Hilti
is not obligated for direct, indirect, incidental or con-
sequential damages, losses or expenses in connec-
tion with, or by reason of, the use of, or inability to
use the tool for any purpose. Implied warranties of
merchantability or fitness for a particular purpose are
specifically excluded.
For repair or replacement, send the tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
en
8
Printed: 08.07.2013 | Doc-Nr: PUB / 5070108 / 000 / 01