22
8. Applications
5. Aim the range meter at the next target.
6. Press the "Measure" key.
The second distance will be measured
and shown in the bottom intermediate
result line. The result of the subtraction
will appear in the result line.
The current difference between
distances is always shown in the
result line.
This procedure can be followed until all
distances have been subtracted.
To terminate the subtraction of distances,
simply measure a distance without first
pressing the "Minus" key. The previous
measurement and calculation results will
be shown in the intermediate displays.
8.6 Setting out
With the range meter, pre-determined
dimensions can be set-out and marked,
such as for installing drywall tracks.
The continuous measurement mode is
used when transfering dimensions from
drawings. (See also section 7.3.3.2
Continuous measurement.)
Hold the "Measure" key pressed for approx.
2 seconds to activate the continuous meas-
urement mode. When doing so, it does not
matter whether the range meter is switched
off or the laser beam is switched on or off.
The range meter always switches to the
continuous measurement mode. Move the
range meter slowly until the
desired distance is reached or appears in
the display.
Press the "Measure" key once again to end
the continuous measurement mode.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070011 / 000 / 00