Hilti PD 30, Руководство по эксплуатации

Страница: 23 / 30

20
8. Applications
1. At the start of the area function, the
laser beam is switched on.
2. Aim the range meter at the target.
3. Press the "Measure" key.
The room width will be measured
and shown.
4. After this, the graphic display will
automatically request measurement
of the room length.
5. Aim the range meter at the next
target to obtain the room length.
6. Press the "Measure" key.
The second distance will be measured,
the area immediately calculated and
the result shown in the result line.
Both distances required to calculate the
area appear in the intermediate result lines
and can be conveniently noted after the
measurements and the calculation.
- NOTE -
To determine another area, press the
"Area" function key again.
8.3 Volume measurement
Volumes can be determined in one
measuring operation.
Press the "Volume" function key. This
switches the laser beam on – ready for
measuring.
MEN
x +
-
I
=
PD 25
The individual steps for determining a
volume are supported by a corresponding
graphic display. To determine the volume
of a room, for example, the following
procedure must be followed:
1. At the start of the volume function,
the laser beam is switched on.
2. Aim the range meter towards at the
target.
3. Press the "Measure" key.
The room width will be measured and
shown.
4. After this, the graphic display will
automatically request measurement
of the room length.
5. Aim the range meter at the next target
to obtain the room length.
6. Press the "Measure" key.
The room length will be measured.
7. After this, the graphic display will
automatically request measurement
of the room height.
8. Aim the range meter at the next target
to obtain the room height.
9. Press the "Measure" key.
The room height will be measured, the
volume immediately calculated and
the result shown in the result line.
All three distances required to calculate
the volume appear in the intermediate
result lines and can be conveniently noted
after the measurements and the calculation.
- NOTE -
To determine another volume, press the
"Volume" function key again.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070011 / 000 / 00