Hilti NURON SF 6-22, Оригинальная инструкция по эксплуатации

Страница: 14 / 192

8 English 2275219
*2275219*
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group
4 Technical data
SF 6-22 SF 6H-22
Rated voltage 21.6 V
DC
21.6 V
DC
Weight in accordance with EPTA Procedure 01,
without battery
2.0 kg 2.0 kg
Speed 1st gear 0 /min … 490 /min 0 /min … 490 /min
2nd gear
0 /min … 2,000 /min 0 /min … 2,000 /min
Torque (soft joint)
≤ 65 Nm ≤ 65 Nm
Impact speed •/• 36,000 /min
Ambient temperature for operation −17 ℃ … 60 ℃ −17 ℃ … 60 ℃
Storage temperature −20 ℃ … 70 ℃ −20 ℃ … 70 ℃
4.1 Battery
Battery operating voltage 21.6 V
Weight, battery See the end of these
operating instructions
Ambient temperature for operation −17 ℃ … 60 ℃
Storage temperature −20 ℃ … 40 ℃
Battery charging starting temperature −10 ℃ … 45 ℃
4.2 Accessory tools – permissible diameters
SF 6-22 SF 6H-22
Ø range of keyless chuck 1.5 mm … 13 mm 1.5 mm … 13 mm
Ø wood drill bits (hardwood) 1.5 mm … 20 mm 1.5 mm … 20 mm
Ø wood drill bits (softwood)
1.5 mm … 32 mm 1.5 mm … 32 mm
Ø drill bits for metal 1.5 mm … 13 mm 1.5 mm … 13 mm
Ø drilling in concrete/masonry (hammer-action
drilling)
•/• 4 mm … 12 mm
4.3 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values
SF 6-22 SF 6H-22
Emission sound pressure level (L
pA
) 74.5 dB(A) 94.5 dB(A)
Uncertainty for the sound pressure level (K
pA
) 5 dB(A) 5 dB(A)