![background image](http://html1.mh-extra.com/html/hilti/nuron-sc-30wr-22/nuron-sc-30wr-22_original-operating-instructions_2136371015.webp)
*2264108*
2264108
English
9
and the cutting width of the blade must be wider than the thickness of
the riving knife.
▶
Adjust the riving knife as described in this instruction manual.
Incorrect spacing, positioning and alignment can make the riving knife
ineffective in preventing kickback.
▶
Always use the riving knife except when plunge cutting.
The riving
knife must be replaced after plunge cutting. The riving knife causes
interference during plunge cutting and can create kickback.
▶
For the riving knife to work, it must be engaged in the workpiece.
The riving knife is ineffective in preventing kickback during short cuts.
▶
Do not operate the saw if the riving knife is bent.
Even a light
interference can slow the closing rate of a guard.
2.3 Additional safety instructions
Personal safety
▶
Never tamper with or modify the product or accessories in any way.
▶
Always hold the power tool with both hands on the grips provided.
Keep the grips dry, clean and free from oil and grease.
▶
Wear ear protectors.
Exposure to noise can cause hearing loss.
▶
Respiratory protection must be worn if the power tool is used without
a dust removal system for work that creates dust.
▶
Operate the power tool only together with the safety devices that
belong to it.
▶
Improve the blood circulation in your fingers by relaxing your hands
and exercising your fingers during breaks between working.
▶
The power tool is not intended for use by inexperienced persons
who have received no special training.
▶
Keep the power tool out of reach of children.
▶
Do not switch the product on before it is at the workplace.
▶
Remove the battery before storing or transporting the power tool.
▶
Do not work overhead with the product.
▶
Do not attempt to brake the product by applying lateral pressure to
the saw blade.
▶
The path of the saw must be free of obstructions. Do not saw into
screws, nails etc.
▶
Do not touch the clamping flange or the clamping screw while the
power tool is running.
▶
Never press the drive spindle lock button while the saw blade is
rotating.
▶
Never direct the power tool toward persons.
▶
Adjust the pressure applied to the saw blade and the material being
cut so that the blade does not stall, possibly causing kickback.
▶
Avoid overheating the tips of the saw blade teeth.
▶
When cutting plastic, melting of the plastic should be avoided.
Содержание Nuron SC 30WR-22
