Hilti GX 120-ME, Руководство по эксплуатации, Страница: 30 / 259

12 EC declaration of conformity (original)
Designation: Gas-driven fastening tool
Type: GX 120‑ME
Generation: 01
Year of design: 2007
We declare, on our sole responsibility, that this
product complies with the following directives and
standards: 75/324/EEC, 91/155/EEC, 64/548/EEC,
EN ISO 12100, EN 13752‑1:2008‑12, EN 50081‑2,
EN 1127‑1, EN 417, ISO 8662‑11 AMD 1:2001-12,
EN 792‑13:A1:2008‑09, EN 60529:2000‑09,
64/548/EEC, EN 55011:1998+A1:1999, CISPR 11:2003,
A1:2004, IEC 61000‑6‑2:2005, EN 61000‑6‑2:2001,
IS1:2005, IEC 61000‑6‑3:1996, EN 61000‑6‑3:2001,
IEC 61000‑4‑2:1995, IEC 61000‑4‑3:2006,
IEC 61000‑4‑8:1993: A1:2000, 2006/42/EC, 2011/65/EU.
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Norbert Wohlwend Tassilo Deinzer
Head of Quality & Processes Manage-
ment Head of BU Direct Fastening
BU Direct Fastening BU Direct Fastening
04/2013 04/2013
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
13 Health and safety of the operator
13.1 Noise information
Gas-actuated fastening tool
Type GX 120-ME
Model Series
Caliber GC 22
Power regulation
+
Application Fastening 1 mm sheet metal to concrete (C40) with the
X-ECT
Declared measured values of noise characteristics according to 2006/42/EC Machinery Directive in conjunction
with DIN EN 15895
Noise (power) level, L
WA, 1S
1
106 dB (A)
Emission sound pressure level at the workplace,
L
pA, 1s
2
102 dB (A)
Peak sound pressure emission level, L
pC, peak
3
137 dB (C)
1 ± 2 dB (A)
2 ± 2 dB (A)
3 ± 2 dB (C)
Operation and set-up conditions: Set-up and operation of the pin driver in accordance with E DIN EN 15895-1 in the
semi-anechoic test room of Müller-BBM GmbH. The ambient conditions in the test room conform to DIN EN ISO 3745.
Testing procedure: Enveloping surface method in anechoic room on reflective surface area in accordance with
E DIN EN 15895, DIN EN ISO 3745 and DIN EN ISO 11201.
NOTE The noise emissions measured and the associated measurement uncertainty represent the upper limit for the
noise values to be expected during the measurements.
Variations in operating conditions may cause deviations from these emission values.
en
26
14. FCC statement
This device complies with Part 15 of the FCC Rules and to RSS-210 of Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Printed: 28.11.2013 | Doc-Nr: PUB / 5069877 / 000 / 02