Hilti DX462CM, Руководство по эксплуатации

Страница: 25 / 108

19
en
5. Technical data
DX 462CM DX 462HM
Weight 3.92 kg (8.64 lb) 4.62 kg (10.19 lb)
Tool length 435 mm (17.13") 425 mm (16.73")
Recommended maximum fastening rate 700 per hour
Cartridges 6.8/11 M green and yellow
Right of technical changes reserved!
6. Before use
6.1 Tool inspection
●
Ensure that there is no cartridge strip in the tool. If
there is cartridge strip in the tool, remove it by hand from
the tool.
●
Check all external parts of the tool for damage at reg-
ular intervals and check that all controls operate prop-
erly. Do not operate the tool when parts are damaged or
when the controls do not operate properly. If necessary,
have the tool repaired at a Hilti service centre.
●
Check the piston for wear (see “8. Care and mainte-
nance”).
6.2 Changing the marking head
1. Check that no cartridge strip is present in the tool. If
a cartridge strip is found in the tool, pull it upwards
and out of the tool by hand.
2. Press the release button on the side of marking head.
3. Unscrew the marking head.
4. Check the marking head piston for wear (see "Care
and maintenance").
5. Push the piston into the tool as far as it will go.
6. Push the marking head firmly onto the piston return
unit.
7. Screw the marking head onto the tool until it engages.
X-MC-MS characters Mini-stress characters exert even less influence on the base material surface than
low-stress. Like these, they have a rounded, deforming radius, but derive their
mini-stress characteristics from the interrupted dot pattern (only available on special)
Please contact your local Hilti Center or Hilti representative for details of other fasteners and accessories.
Cartridges
Ordering designation Colour code Power level
6.8x11 M green Green Low
6.8x11 M yellow Yellow Medium
90% of all marking can be carried out using the green cartridge. Use the cartridge with the lowest possible power in order to keep wear on
the piston, impact head and marking characters to a minimum
Cleaning set
Hilti spray, flat brush, large round brush, small round brush, scraper, cleaning cloth.