Hilti DX 9-ENP, Оригинальная инструкция по эксплуатации

Страница: 37 / 336

*2241307*
2241307 English 29
• It is a requirement for EFTA countries that the cartridges must be CE-compliant and must bear the CE
mark of compliance.
• It is a requirement for the United Kingdom that the cartridges must be UKCA-compliant and must bear
the UKCA mark of compliance.
• It is a requirement for the USA that the cartridges must be compliant with the stipulations set out in
ANSI A10.3-2020.
• It is a requirement for the non-European member states of the C.I.P. that the cartridges must have C.I.P.
approval for the DX fastening tool used.
• It is a requirement for the remaining countries that the cartridges must have passed the firing-residues
test in accordance with EN 16264 and must have a manufacturer's declaration to this effect.
Cartridges
Item number Ordering designation Annotation
2128213 6.8/18 M40 black very strong
2128211 6.8/18 M40 red strong
3.10 Items supplied
Fastening tool, toolbox, cleaning set, scraper, ramrod, Hilti lubricant spray, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
4.1 Technical data
DX 9–ENP
Weight in accordance with EPTA procedure 01 12.5 kg
Dimensions (L × W × H) 985 mm × 365 mm × 175 mm
Magazine capacity 40 nails / 40 cartridges
Suitable cartridges 6.8/18 M40 red, black, blue
Suitable fasteners
X­ENP 19
Fastener driving rate 1,200 rev/h
Thickness of the supporting steel ≥ 6 mm
Compression stroke 89 mm
Contact pressure ≥ 250 N … < 330 N
Application temperature (ambient temperature) −15 ℃ … 50 ℃
4.2 Noise information
The noise values listed were determined under the following conditions:
General conditions for noise measurements
Direct fastening tool DX 9–ENP
Model Series
Caliber 6.8/18 black
Power setting 4
Application Fastening to steel plate (Brinell
hardness 610 N/mm 2 ) using the
X­ENP­19 L15MXR
Noise information in accordance with EN 15895
Emission sound pressure level (L
pA
)
103 dB(A)
Uncertainty for the sound pressure level (K
pA
) 2 dB(A)
Sound (power) level (L
WA
)
113 dB(A)
Uncertainty for the sound power level (K
WA
) 2 dB(A)