Hilti DX 6 Series, Оригинальная инструкция по эксплуатации

Страница: 30 / 356

24 English 2232121
*2232121*
3.5.1 Data transmission via Bluetooth
The data transmission interval can vary, depending on the available power source of the product. The signal
range can vary greatly depending on external conditions, including the receiving device used. The Bluetooth
range can be significantly less inside closed rooms and through metallic barriers (e g. walls, shelving units,
cases, etc.). Depending on ambient conditions, several transmission intervals may be required before the
product is detected.
If the product is not detected, check the following:
• Is the distance to the mobile terminal device too great?
→ Reduce the distance between the mobile terminal device and the product.
3.5.2 Installing and setting up the app
In order to be able to use the connectivity functions, you first have to install the respective Hilti app.
(1.) Download the app from the corresponding app store (Apple App Store, Google Play Store).
You will require a user account on the corresponding app store to do this.
(2.) When you start the app for the first time, either log in with your account or register.
(3.) The display of your mobile terminal device will show you all the subsequent steps required to connect
the product to the mobile device.
In addition, be sure to study all the notes on operation in the app. This will give you a better overview
of how the connection is made and how the functions are used.
3.6 Information about the app
To find out more about the app, to download it and start it, scan the QR code in the case.
3.7 Requirements to be met by cartridges
Use only the Hilti DX cartridges listed in this table, or other suitable cartridges that are compliant with the
minimum safety requirements:
• It is a requirement for EU and EFTA countries that the cartridges must be CE-compliant and must bear
the CE mark of compliance.
• It is a requirement for the USA that the cartridges must be compliant with the stipulations set out in
ANSI A10.3-2020.
• It is a requirement for the non-European member states of the C.I.P. that the cartridge must have C.I.P.
approval for the DX fastening tool used.
• It is a requirement for the remaining countries that the cartridges must have passed the firing-residues
test in accordance with EN 16264 and must have a manufacturer's declaration to this effect.
WARNING! Use of cartridges that do not meet the minimum safety requirements can lead to a build-
up of unburned powder. A sudden explosion and severe injuries to the operator and bystanders can
result. A build-up of unburned powder can be prevented only by professional cleaning by Hilti Service.
Cartridges
Ordering designation Color Power level
DX 6 cartridge titanium-gray strong
DX 6 cartridge black extra-strong
3.8 Minimum distances and edge distances
WARNING! You must always observe certain minimum distances and spacing when driving
fasteners. They can differ, depending on the product.
For detailed information, request a copy of the Direct Fastening Technology Manual from the local
Hilti Store Store.