8
English
2328430
*2328430*
Power tool use and care
▶
Do not force the power tool. Use the correct power tool for your application.
The
correct power tool will do the job better and safer at the rate for which it was designed.
▶
Do not use the power tool if the switch does not turn it on and off.
Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
▶
Disconnect the plug from the power source and/or remove the battery pack,
if detachable, from the power tool before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the
risk of starting the power tool accidentally.
▶
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
▶
Maintain power tools and accessories. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
▶
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
▶
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations different from those intended could
result in a hazardous situation.
▶
Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control of
the tool in unexpected situations.
Service
▶
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
2.3 Additional safety instructions for wall saws
▶
Operate power tool by insulated grasping surfaces, when performing an oper-
ation where the cutting accessory may contact hidden wiring or its own cord.
A cutting accessory contacting a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an electric shock.
▶
Wear ear protectors when diamond sawing.
Exposure to noise can cause hearing
loss.
▶
When sawing through the workpiece, ensure to protect persons and the work
area on the other side.
The diamond wheel may protrude through the workpiece.
▶
Never leave the wall saw unattended during operation.
This reduces the risk of
the diamond wheel jamming, which could cause loss of control or damage to the wall
saw.
▶
Ensure that the method of securing the track guiding system to the workpiece
is capable of holding and restraining the machine during use.
If the workpiece
is weak or porous, the anchor(s) can pull out, causing the track guiding system to
release from the workpiece.
▶
If the diamond wheel becomes jammed, stop applying feed force and turn off
the tool. Investigate and take corrective action to eliminate the cause of the
diamond wheel jamming.
Attempting to continue operation with a stalled diamond
wheel can lead to loss of control or damage to the wall saw.
Содержание DST 20-CA
