16
English
2153083
*2153083*
Lifting the floor saw trolley
The floor saw trolley may be lifted only when empty, i.e. no saw head and no weights
mounted on it.
▶
Remove the saw head from the floor saw trolley.
▶
Remove the weights from the floor saw trolley.
▶
Bring the pointer of the cutting line indicator into the transport position.
▶
Fold back the cutting line indicator.
▶
Loosen the bolts securing the handlebar until it is free to move and then fold the
handlebar toward the floor saw trolley.
▶
Retighten the handlebar securing bolts firmly.
CAUTION
Risk of injury!
The floor saw trolley is very heavy.
▶
Never lift the floor saw trolley alone.
▶
When lifting the floor saw trolley, always grip it by the frame.
9
Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable to remedy
the problem by yourself, please contact
Hilti
Service.
Trouble or fault
Possible cause
Action to be taken
The cut is not straight.
Attention was not paid to the
position of the cutting line
indicator.
▶
Pay attention to the
cutting line indicator and
steer/correct the direction
of the floor saw trolley if
necessary.
Inadequate blade tension.
▶
Change the saw blade.
The saw blade is blunt.
▶
Change the saw blade.
Unsuitable saw blade speci-
fication.
▶
Check the specification
and change the saw blade
if necessary.
Low sawing perfor-
mance.
Unsuitable saw blade speci-
fication.
▶
Check the specification
and change the saw blade
if necessary.
Cutting depth is too great.
▶
Reduce the cutting depth
(blade depth setting).
The floor saw trolley is
lifted off the floor.
Floor saw trolley advance
speed is too high.
▶
Reduce the speed of
advance.
Cutting depth is too great.
▶
Reduce the cutting depth
(blade depth setting).
Concrete with high rein-
forcement content.
▶
Reduce the cutting depth
(blade depth setting).
Saw blade speed is too low
or too high.
▶
Increase or, respectively,
reduce saw blade speed.
10
Disposal
Most of the materials from which
Hilti
tools and appliances are manufactured can
be recycled. The materials must be correctly separated before they can be recycled.
Printed: 07.05.2019 | Doc-Nr: PUB / 5492449 / 000 / 00
Содержание DSF 1030-TS
