![background image](http://html1.mh-extra.com/html/hilti/ds-wss-30/ds-wss-30_operating-instructions-manual_2136342019.webp)
19
The built-in return pulley and wire store pulley can be used to reduce the effective length of the diamond wire by up
to 8 m with a rail length of only 2 m (DS-R 200 L).
Important
No matter how the wire saw is set up, the DS-WSRP wire length adjusting pulley must always be fitted and the
diamond wire guard belonging to it attached at the bottom of the drive wheel guard.
Configuration 1
Configuration 2
Configuration 3
Configuration 4
2
×
1.5 m
2
×
0.5 m
2
×
0.5 m
2
×
1.5 m
= 3 m
+
+
+
= 1 m
= 1 m
= 3 m
Total 8 m
Drive wheel guard
End stop
Diamond wire guard
Wire length adjusting pulley
2 m rail (DS-R200L)
8.Diamond wire store
Printed: 08.07.2013 | Doc-Nr: PUB / 5069762 / 000 / 01