*2208336*
2208336
English
7
Status
Meaning
The service indicator lights up when the power tool
is in working order.
• The carbon brush wear limit has almost been
reached. You can continue working for a number
of hours after the indicator first shows, before
automatic cut-out is activated.
• The carbon brushes have been changed and
must be run in by letting the machine run under
no load for at least 1 minute without interruption,
in order to achieve the optimum service life.
The service indicator lights up when the power tool
is not in working order.
• The carbon brushes are worn and have to be
replaced.
• The device is defective.
3.5
Items supplied
Slitting tool, pin wrench, slitting discs, break-out tool, operating instructions.
Other system products approved for use with this product can be found at your local
Hilti Store
or at:
www.hilti.group
4
Technical data
4.1
Slitting tool
For rated voltage, rated current and/or power, line frequency and rated speed, refer to the country-
specific type identification plate.
Weight
16.8 lb
(7.6 kg)
Arbor diameter, disc mount
0.87 in
(22.2 mm)
Thickness of the diamond slitting disc
≤ 0.1 in
(≤ 3 mm)
Diameter of the diamond slitting disc
≤ 5.9 in
(≤ 150 mm)
4.2
Dimensions and format of suitable diamond slitting discs
Diamond slitting discs must meet the following require-
ments in terms of dimensions and format.
Technical data
Slot width between segments
(G)
≤ 15 mm
Cutting angle
Negative
5
Preparations at the workplace
CAUTION
Risk of injury!
Inadvertent starting of the product.
▶
Unplug the supply cord before making adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
Содержание DCH 150-SL
