Hilti BX 3-ME, Руководство по эксплуатации

Страница: 6 / 24

4 English
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
Battery tool use and care
▶
Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
▶
Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
▶
When battery pack is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the battery terminals together
may cause burns or a fire.
▶
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
Service
▶
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
2.2 Tacker safety warnings
▶
Always assume that the tool contains fasteners. Careless handling of the fastening
tool can result in unexpected firing of nails causing personal injury.
▶
Do not point the tool towards yourself or anyone nearby. A nail will be ejected by
the tool if it is triggered unexpectedly, possibly leading to injury.
▶
Do not actuate the tool unless the tool is placed firmly against the workpiece. If
the tool is not in contact with the workpiece, the fastener may be deflected away from
your target.
▶
Disconnect the tool from the power source when the fastener jams in the tool.
While removing a jammed fastener, the fastening tool may be accidentally activated if
it is plugged in.
▶
Use caution while removing a jammed fastener. The mechanism may be under
tension and the nail may be forcefully ejected while attempting to free a jam.
▶
When fastening electrical cables, make sure the cables are not energized.
Hold the fastening tool only by insulated gripping surfaces. Use only fasteners
designed for electrical cable installations. Check that the fastener has not
damaged the insulation of the electrical cable. A nail that damages the insulation
of electric cables can lead to electric shock and fire hazards.
2.3 Safety instructions
Basic information concerning safety
WARNING! Read all safety precautions and other instructions. Failure to observe
the safety precautions and other instructions may result in electric shock, fire and/or
serious injury.
Keep all safety precautions and instructions for future reference.
Requirements to be met by users
▶
Only authorized, appropriately trained persons may operate or service this tool.
Personal protective equipment
▶
You and any other persons in the vicinity must wear suitable eye protection and a
hard hat while the tool is in use.
Printed: 04.10.2017 | Doc-Nr: PUB / 5377202 / 000 / 01