Hilti AG 100-7 D, Руководство по эксплуатации

Страница: 15 / 24

English 13
6.2.2 Adjusting the guard
1. Release the clamping lever.
2. Rotate the guard to the required position.
3. Secure the guard by closing the clamping lever.
6.2.3 Removing the hood
1. Release the clamping lever.
2. Rotate the guard until the keyed locating lug is aligned with the keyed locating groove and then remove
the guard.
6.2.4 Fitting or removing the front cover
1. Position the front cover with the closed side on the standard guard and push it on until it engages.
2. To remove it, release the catch for the front cover and then lift the front cover away from the standard
guard.
6.3 Fitting and removing accessory tools
CAUTION
Risk of injury. The accessory tool may be hot.
▶
Wear protective gloves when changing the accessory tool.
Note
Diamond discs must be replaced when their cutting or grinding performance drops significantly. This
generally is the case when the diamond segments reach a height of less than 2 mm (1/16").
Other discs must be replaced when their cutting performance drops significantly or other parts of the
angle grinder (not the disc) come into contact with the material you are working on.
Abrasive discs must be replaced when their expiry date has been reached.
Printed: 20.07.2017 | Doc-Nr: PUB / 5169257 / 000 / 05