2.6 Physical Dimensions
The protocol converter is installed in an aluminium enclosure. This facilitates di-
rect installation in the cabinet on a mounting rail (TS35 to DIN EN 50022). As an
alternative, an enclosure variant for direct screw fitting on an assembly wall is
available.
The physical dimensions and the arrangement of the plug connectors are shown
in the drawings below.
Connector arrangement on the protocol converter
Physical dimensions of the protocol converter for snap mounting to a mounting rail
The overall height of the converter is approx. 80 mm.
Open the top of the protocol
converter if you want to
change the serial interface
type -------------->
105
105
General device description
16
Copyright * Hilscher Gesellschaft für Systemautomation mbH * Hotline/Support: +49(0)6190/9907-99 * De:P30DPS#5E
