Installation
10/35
Step-by-step instructions
Ø
Remove the screws of the cover of the extension slot at the bottom of
the netPI.
Figure 1: Remove cover of extension slot
Figure 2: Extension slot with cover removed
Ø
Insert the NPIX module into the extension slot. Take care to fit the
guiding rail/slit at the upper module cover correctly into the guiding pin
of the extension slot.
Figure 3: Inserting module
Ø
Push the module into the slot until it reaches its final position.
netPI Extension Modules | NPIX
DOC171201HW01EN | Revision 1 | English | 2018-01 | Released | Public
© Hilscher 2018
