Packing List
CC17HP Unit
17-Gallon Water Reservoir (Integral)
High Pressure Spray Gun
17-foot Discharge Hose
Utility Bag
Battery Charger (Integral)
Telescoping Handle
Instruction Manual
(2) Storage Shelves
18-Inch Floor Squeegee
Initial Setup:
Attach the spray gun to the operator hose by pulling down the quick-release.
Your machine came with both shelving and waste basket options. Use whichever you prefer.
To access the water fill port, turn the black cap counter-clockwise to remove. Using cold tap water, fill the fresh water
tank. It will hold up to 17 gallons.
To connect chemical bottles, remove the shipping cap, slide bottle into molded opening with the bottle spout to the out-
side of the unit. Attach the chemical feed line by carefully threading the cap on the end of the line to the bottle.
Initial Priming
Set the chemical selector to desired product.
Turn the power selector switch to the “on position.”
Set the spray gun to low pressure by pulling the nozzle toward you. Low pressure is required to prime the chemical.
Direct the spray nozzle into a drain or other container and pull the trigger. Run until an even spray patter is established.
Turn the selector valves to the other two positions and repeat.
Priming each position on the chemical valves may take a few minutes.
Normal Operation:
The pump will run continuously, even when the unit is not spraying.
The CC17HP is designed to use a low-pressure setting for applying the cleaning/disinfecting solution, and high-pressure
setting for clear water rinsing. On low pressure, the CC17HP injects the desired chemical into the pump at the proper
dilution rate.
After applying the proper amount of cleaning disinfectant solution, push out on the plastic nozzle and the unit will auto-
matically switch to high-pressure mode.
Содержание TRIDENT Cleaning Companion CC17HP
Страница 1: ...Use and Maintenance manual CC17HP...
