Hillyard 108538, Руководство по обслуживанию

Страница: 116 / 117

10.3 Superelastic Wheels Kit - 225735 (Disc)
10.3.1 Description
The Superelastic Wheels kit allows to install rubber wheels by replacing the standard antiskid ones, in case of
uneven applications to improve the driving comfort.
10.3.2 Machine Preparation
Before installing the Superelastic Wheels kit, it is mandatory to put the machine in safe condition. Drain both
tanks, turn off the machine and unplug the batteries.
10.3.3 Installing instructions
Rear Wheels
ˆ
Unplug the power cable of the batteries.
ˆ
Lift up the related rear wheel from the ground.
ˆ
Remove the hub cap.
ˆ
Loosen the fixing bolt of the wheel to the drive shaft and
remove the wheel.
ˆ
Fit the rear wheel.
ˆ
Proceed the same way with the other rear wheel.
Front Wheels
ˆ
Lift up the front wheels from the ground.
ˆ
Remove the screw that secures the two wheels to the shaft.
ˆ
Remove the shaft, remove wheels and Spacers. Consider
that the spacers included in the kit are different from those
of the antiskid wheels.
ˆ
Insert the shaft into the superelastic wheels by placing the
larger spacer between them, and the smaller spacers at the
ends.
ˆ
Replace the screw that secures the two wheels to the shaft.
116