Hillstone SG-6000 Series Firewall Appliance Installation Manual
2.
Launch a Web browser of the management PC, enter the URL “http://192.168.1.1”
in the address bar, and then press Enter.
3.
Enter the default administrator name and password “hillstone” in both the <Login>
and <Password> text boxes.
4.
Click the “Login” button to enter WebUI main page. Then you can set other
configurations to the appliance.
Tenet and SSH
You can also establish Telnet and SSH configuration environments. For more information,
please refer to
Hillstone SG-6000 Series Firewall Appliance User Guide
.
Basic Configuration
Before configuration, you should be familiar with the functionalities of the appliance and how
it will be deployed in your network. Next, based on the appliance’s position in the network,
network management requirements and network security design requirements, you can
design a reasonable topology, choose proper operation mode of the ports, set security zones
and perform the network and security policy configuration.
The basic configuration steps may include:
1.
Create security zones, including the link layer (L2) and network layer (L3). Bind
different interfaces to correct security zones respectively.
2.
Assign IP addresses to interfaces.
3.
Configure the management functions of the interfaces and create the security policy
rules.
4.
Figure out the distribution solutions of the network address and configure the
network address translation rules as needed.
5.
Keep network connectivity by configuring routes.
6.
Configure security policy rules between security zones.
7.
Configure network parameters, such as DHCP and DNS agent, etc.
Note
: For more information, please refer to
Hillstone SG-6000 Series Firewall Appliance User
Guide
.
- 37 -
