Hills SmartIP-16PD Скачать руководство пользователя страница 35

Страница: 35 / 96

Part 2 - Getting Started

• Panic Recording takes place irrespective of any

recording schedule set up by the user.

• Panic Recording video profile from Record Setup –

General applies to all Panic Recording videos.

Panic Recording will not take place if recording mode
is not set to Recycle and the HDD has reached 100%
of its capacity.

Audio Recording

If the Record Audio option under Record Setup >
General has been enabled the camera will record audio
along with video. For more information, refer to the
Audio on page 52, Record Setup on page 53.

Check your local laws and regulations on making
audio recordings.

Video Recording Playback

You can play back video recordings by using mouse or
remote control.

• Login with an account that has search permission is

needed to playback video recordings.

• The initial video playback point in Search mode is

the recording's last playback point or the end of the
recording data.

• Audio playback of the selected recording is available

in full screen mode only.

• Covert protection on cameras also applies to video

recording playback.

All Channel Playback

Press the Menu button while in Live mode.

Select the Search Mode icon and then select
Time-Lapse Search or Event Log Search.

The selected search mode will be initiated.

For more information on data search, refer to the Part
4 - Search on page 73.

Remote Control Buttons during
Playback

Camera Button: Displays the selected recording in
full screen.

Zoom Button: Allows you to zoom in on a specific
area of the recording.

Layout Button: Cycle through single screen, 2x2,
3x3, 4x4, 5x5, and 6x6 modes.

Context Menu

While in Search mode, press the remote control's

button and then the Menu button to display the

Context Menu window. Alternatively, right-click on the
mouse to access the Context Menu.

• Zoom: Zoom in.
• Audio: Enable/disable audio. (This function supports

only in single screen.)

• Edit Group: Rearrange the split screen layout.

Содержание SmartIP-16PD

































































































Результаты поиска

Содержание SmartIP-16PD

Отзывы:

Похожие инструкции для SmartIP-16PD

Бренды по названию

Популярные бренды

Hills SmartIP-16PD, Руководство пользователя

Результаты поиска

Содержание SmartIP-16PD

Отзывы:

Похожие инструкции для SmartIP-16PD

Бренды по названию

Популярные бренды