Hills Slim Retracting 4-Line Скачать руководство пользователя страница 7

Страница: 7 / 20

3a.5

Masonry fasteners are not included

with this product. When attaching to a
sound masonry wall, 5 x 10mm (13/32")
diameter masonry sleeve anchors are
recommended.

Drill 5 holes using a 10mm (13/32")
masonry drill where marked on the
Retracting Line Drilling Template.

3a.6

Remove Drilling Template.

3a.7

Securely fasten the Centre Mount Bracket
to the wall using a masonry sleeve anchor
and using the centre hole.

3a.8

Using the Arm Handles (refer to 8.1 and

8.2 on page 15) lower the Arm and pull
it to the front of the cabinet. This is to
expose the underside cavity.

3a.9

Carefully position the cabinet against the
wall and above the Centre Mount Bracket.

Align the cavity at the rear of the
underside of the cabinet with the Centre
Mount Bracket. Carefully lower the cabinet
onto the Centre Mount Bracket.

Note:

The Centre Mount Bracket will

capture the products internal frame and
will assist in supporting the cabinet while
the next step is carried out.

3a.10

Insert masonry sleeve fasteners in the

remaining 4 holes and tighten securely.

3a.11

Return the Arm to its original position

within the cabinet.

3a.12

Follow Step 4 on page 11 to complete

installation of the cabinet.

Ø10 x 55mm

Ø10 x 75mm

HLS0046_4-6 line_Owners Manual_v6.indd 7

1/07/13 5:16 PM

Содержание Slim Retracting 4-Line





















Результаты поиска

Содержание Slim Retracting 4-Line

Отзывы:

Похожие инструкции для Slim Retracting 4-Line

Бренды по названию

Популярные бренды

Hills Slim Retracting 4-Line, Руководство по эксплуатации продукта

Результаты поиска

Содержание Slim Retracting 4-Line

Отзывы:

Похожие инструкции для Slim Retracting 4-Line

Бренды по названию

Популярные бренды