8
I
nstallation
Camera alert setup and
sleep mode
Move the Alarm switch to the
VOX position:
Turn on the sound detection warning
function by moving the Alarm switch
at the back of the camera to the
VOX position.
When the three LED lights on the left
of the Volume indicator illuminate for
2 seconds, the camera is now setup
to detect sound with a warning alarm
to alert you. As soon as sound is
detected by the camera, an audio
alarm will be sent to the receiver
and will continue for 2 minutes or
until the Alarm off button is engaged.
The system enters into an automatic
35 seconds snooze mode. After 35
seconds, the camera will return back
to the original sound detection mode.
If the first LED light on the Volume
indicator does not turn on in 3 minutes,
the system will automatically enter
into sleep mode, and will not be active
until an alarm is triggered or the
Sleep Button on the receiver is
manually pressed.
•
•
Moving the Alarm switch to the
OFF position:
The sound detection alarm function
may be disabled at any time by moving
the alarm switch at the back of the
camera to the OFF position.
Note:
The alarm sound will automatically turn
off if the alarm off button is not pressed
within 2 minutes.
If the alarm fails to trigger, check
the volume to ensure it is turned up.
TE0166_Child_Video_Monitor_Audio_Prod_Manual_PM1009a.indd 8
10/02/2015 12:03 pm
