6
I
nstallation
Channel synchronisation
Channel synchronisation will be preset
upon first time use. Please follow the
instructions below to change channels.
(i) Slide the channel button on the side
of the camera to a desired channel.
(ii) Press and hold the Alarm off button
on the receiver until the volume
indicator flashes. Slide the Learning
button to ON position on the back of
the camera unit and then slide it to
OFF position as the volume indicator
flashes on the receiver.
(iii) The channel number displayed
on the receiver should match the
channel selected on the back of
the camera.
4.
5.
Notes:
The receiver supports up to four
cameras simultaneously. Pressing
and holding the Channel button for
approximately three seconds will activate
the auto switch browser mode. In this
mode the receiver will automatically
switch channels in a set order, one by
one, in 6 second intervals
Learning
ON
OFF
TE0166_Child_Video_Monitor_Audio_Prod_Manual_PM1009a.indd 6
10/02/2015 12:03 pm
