6
Operation
Operating Instructions
Important:
Rinse the inside of the bottle with
cold water before use. Before using with any
chemicals it is advisable to familiarise yourself
with the sprayer by trialing it first with water
only. Thick mixtures can clog the spray nozzle.
Mixtures of this kind should be strained to
prevent blockages. Wash the bottle, attachments
and your hands thoroughly after use.
Before Use
• Remove the internal pump assembly by
unscrewing the container cap. Fill liquid
to the required level.
Do not exceed the
“MAXIMUM FILLING” level.
• Insert internal pump assembly and tighten
container cap firmly by hand.
• Make sure the safety valve and hose retainer
cap are tight to prevent air escaping.
• Firmly screw the lance assembly to the
trigger handle.
Operation
• Pump the sprayer until the safety valve starts
to open and vent. Your sprayer is designed to
operate at 40 P.S.I. (275 kpa). You will notice
that when the sprayer is at full pressure
the safety valve will lift and a red indicator
becomes visible.
• Pump periodically to maintain constant
spraying pressure.
• Lock pump handle into container cap. This
allows you to carry the sprayer. You can also
use the strap supplied.
• Start spraying by pressing the on/off trigger.
The trigger is equipped with a lock for
continuous spraying. To lock, press the trigger
and slide the trigger lock forward. To unlock,
slide the trigger lock back and release the on/
off trigger.
• Choose the type of nozzle according to
your spraying application. Turn the nozzle to
obtain the desired spray pattern.
455644_HH2358_4L_5L_7L_8L_Pressure_Manualv2.indd 6
29/10/2015 3:44 pm
