Hillrom Accella 900 Скачать руководство пользователя страница 95 | Manualshive

Страница: 95 / 114

Hillrom Accella 900 Скачать руководство пользователя страница 95

194412(11) - Hill-Rom® 900 Accella™ Bed - Instructions For Use

Page 89

De
co
nt
amin

ati
o

n

,

Ma
in

te

na
n

ce

Decontamination, Maintenance

Decontaminating the bed

Safety Recommendations

• Ensure that the bed cannot move.

• Lock out all electrical functions.

• Disconnect the bed and stow the power cable (see “Securing the power

cable” page 84).

• Check that all plugs are well connected (control unit, electric motors on the

power supply unit).

• Never clean the bed by pouring water on it, nor with high-pressure hoses nor

in tunnel washes.

• Never use water at a temperature of more than 60°C.

• Avoid excess water on the connectors.

• Refer to the recommendations of the cleaning product manufacturer.

• Thoroughly dry before reusing.

• In order to guarantee the performances of the bed, all components that are

removed for cleaning purposes must be returned to exactly the same place.

Failure to implement one or more of these recommendations may lead to damage
or deterioration, preventing use of the bed and rendering the warranty void.

Recommendations for cleaning and disinfection

The following recommendations are not designed to replace existing cleaning
protocols drawn up by the hygiene officer or by other bodies for your hospital.

The disinfecting method described below applies specifically to the bed and its
accessories and is designed to save time and to help combat nosocomial
infection more effectively.

Clean the bed with a lightly dampened cloth and ordinary disinfectant. Do not use
excessive liquid.

This bed is designed for easy cleaning and optimal hygiene.

«
...
93
94
95
96
97
...
»

Содержание Accella 900



















































































































Отзывы:

Нет отзывов