Hillrom Accella 900 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 114

Hillrom Accella 900 Скачать руководство пользователя страница 53

194412(11) - Hill-Rom® 900 Accella™ Bed - Instructions For Use

Page 47

Mob

ili

zi

n

g

th
e pat

ien
t

Display the weight to within 100 g

1.

on the GCI.

2.

Press the command

100g Magnification

3.

The weight is displayed to within 100 g
for 5 seconds.





Add/remove parts on the bed

Caregivers can use this function to change the parts on the bed without changing the
weight reading on display.

If a patient is

not

on the bed, use the Zero/Tare function after changing the parts.

The function stores the patient’s weight in memory
while changing items on the bed.

1.

on the home screen of the GCI.

2.

Add/Remove Items

. Follow the

instructions.



The list of items added or removed, displayed

close to the bed, may be useful later on.

Weighed/unweighed parts

The weigh system is very sensitive. The weight reading is more precise if the part of the
bed that is weighed (sleep surface, siderails, footboard – see weighed parts below) does
not come into contact with the fixed part of the bed (headboard, chassis, power supply
cables and tubes of the various possible accessories – see unweighed parts below). Even if
an object is in slight contact with the bed, the value on the screen will be inaccurate. If
necessary, remove the headboard during scale.

The screen shows the zone and the parts of the bed that are included when weighing in
green.

«
...
51
52
53
54
55
...
»

Содержание Accella 900



















































































































Отзывы:

Нет отзывов