3
www.liko.com
Transfer Motor Likorall ES • 7EN120112-05
Definitions
1. Transfer motor
2. Lift Unit Likorall 242 ES/242 ES R2R/243 ES/250 ES
3. Connector cable for transfer motor
4. Hand control with 4 buttons
5. Wheel track
6. Drive wheel
7. Contact plate
8. Plastic housing
Likorall with transfer motor
4
Transfer motor
2
1
Manoeuvring
Likorall with transfer motor is operated with a light touch
on the buttons of the hand control. The arrow marking
indicates the direction. The movement is stopped when
the button is released. The hand control for the Likorall
with transfer motor has four or six buttons. The travel
direction along the rail is controlled with a press on
button or .
The buttons and are used for control of lifting
motion (up/down).
The buttons and are used for switch control.
HandControl IR
Prod. No. 3126060
All models of Likorall ES can be equipped with a
wireless hand control (IR). The hand control with IR
control has six buttons and operates as the fixed hand
control (please see explanation at left). The hand control
normally works within a radius of 2-5 m from the lift,
depending on the angle between the hand control
and the IR receiver on the end cover of the lift motor.
The HandControl IR has batteries that need to be
replaced periodically (2 x AAA, LR03).
Operation
3
Simple Troubleshooting
The Transfer motor doesn’t work/ stops
1. Check to ensure that the emergency stop button is
not pressed in.
2. Check that the hand control is correctly connected.
3. Charge the lift motor battery.
4.
If the Transfer motor still does not work properly,
please contact Liko/Hill-Rom.
7
5
6
8
