Hill-Rom Excel Care, Руководство пользователя

Страница: 11 / 60

Use the Siderails
WARNING:
Evaluate patients for entrapment risk according to
facility protocol, and monitor patients appropriately.
WARNING:
Evaluate patients for entrapment risk according to
facility protocol, and monitor patients appropriately.
Make sure all siderails are fully latched when in the
raised position. Failure to do either of these could result
in serious injury or death.
NOTE:
Siderails are intended to be a reminder to the patient of the
unit’s edges, not a patient-restraining device. When appropriate, Hill-Rom recommends
that medical personnel determine the correct methods necessary to make sure a patient
remains safely in bed.
Adjust the Vertical Height of the Siderail
• Raise—
1. Pull up on the siderail latch, and pull the siderail up until its latches in the extended
height.
2. Make sure the siderail stays in the raised position.
• Lower—
1. Pull up on the siderail latch, and push the siderail down until it latches in its lowest
vertical position.
2. Make sure the siderail stays in the lowest position.
Raise and Lower the Siderail
• Raise—Pivot the siderail up until it locks in the raised
position.
• Lower—
1. Completely lower the vertical height of the siderail.
2. Pull out on the knob on the lower side of the siderail.
CAUTION:
Do not attempt to raise the vertical height of the siderail while pivoting it to the
stowed position under the bed. Equipment damage could occur.
3. Pivot the siderail away from the bed until it hangs in the stowed position against the
stop under the bed. Do not attempt to raise the vertical height of the siderail while
pivoting it to the stored position.
10