Hill-Rom Advanta P1600, Руководство по обслуживанию

Страница: 48 / 429

General Operation
Chapter 1: Introduction
Page 1 - 30 Advanta™ Bed Service Manual (man168ra)
Optional Controls
Nurse Call
On an Advanta™ Bed equipped with the nurse call feature, use the nurse
switch to activate the nurse call. To place a call on the nurse call system, press
the nurse switch on any siderail control panel. A tone sounds to confirm that
the call has been placed, and the yellow call indicator light on the patient’s
siderail control panel illuminates. A red answer light illuminates on the
patient’s siderail control panel when the call has been acknowledged by the
answering party.
To activate: Press and release the nurse switch. The yellow call light on the
patient siderail nurse switch illuminates.
If power is lost, the nurse call function can still operate for at least 4 hours.
Patient Position Monitor (PPM)
The PPM is an integrated patient motion monitoring system with multiple
modes of operation and volume settings. The PPM allows caregivers to
individually determine the proper level of unattended monitoring for each
patient.
Control location: Left caregiver siderail
Enable Switch
For A model beds:
Access to the mode and volume control switches on the PPM system can be
gained by pressing and holding the enable switch. This feature allows easy
access to the PPM controls, while reducing the potential for accidental or
intentional use by unauthorized personnel.
For B model beds:
The enable switch is only used to disable the system. The PPM system can be
disarmed or silenced by pressing and holding the enable switch and any mode
switch.
System Power
Turning on the system: For best results, the patient should be centered on the
mattress, both from head-to-foot and from side-to-side. If extra equipment
must be added to the bed, be sure to do so before activating the PPM system.