Hill-Rom Advanta P1600 Скачать руководство пользователя страница 313 | Manualshive

Страница: 313 / 429

Hill-Rom Advanta P1600 Скачать руководство пользователя страница 313

Exchange Policy

Chapter 5: Parts List

Advanta™ Bed Service Manual (man168ra)

Page 5 - 7

5

Exchange Policy

The following are policies for in-warranty and out-of-warranty exchanges from
Hill-Rom.

In-Warranty Exchanges

In some cases, Hill-Rom will request that parts/products be returned for
inspection. When this occurs, you are expected to return parts/products within
30 days of receipt of the exchange part. If you fail to return the inoperative
parts/products within the 30 day period, Hill-Rom will invoice your facility for
the full selling price of the parts/products.

NOTE:
The preceding billing procedure pertains only to parts/products that Hill-Rom
requests to be returned.

In some cases, the invoice accompanying the parts will show the full selling
price (only for internal use at Hill-Rom). Do not confuse this price with your
price.

Do not return any parts without an RMA number. When parts/products have
been requested to be returned, Hill-Rom will include an RMA packet with the
parts/products shipment. If an RMA number is not available, obtain one by
phoning Hill-Rom Technical Support at (800) 445-3720.

Out-of-Warranty Exchanges

You are expected to return the inoperative parts/products within 30 days of
receipt of the exchange part. Hill-Rom will include an RMA packet with the
parts/products shipment. If an RMA number is not available, obtain one by
phoning Hill-Rom Technical Support at (800) 445-3720. Hill-Rom will
invoice your facility for the full selling price of the parts/products. Upon return
of the inoperative parts/products, Hill-Rom will issue a credit to your facility
for the difference between the exchange price and the full selling price of
the parts/products.

«
...
311
312
313
314
315
...
»

Содержание Advanta P1600














































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды