8
7EN160183 Rev. 8 • 2020
www.hillrom.com
Returning to the Supine Position
When lifting from the floor, we recommend Liko ComfortSling Plus High Mod. 350, which provides good head support.
An alternate method for applying the sling:
For patients who cannot be turned on their sides, sliding sheets can be used to
apply the sling in the supine position. Place two sliding sheets under the patient, and apply the sling by pulling it between the
sliding sheets. Contact your local Hill-Rom representative for more information.
Carefully work the sling out on the other side. Make sure the
patient is positioned in the middle of the sling. Adjust the
position as needed. The lower edge of the sling should be just
below the bend in the patient’s knees.
Raise the back support. First connect the upper strap loops
to the sling bar, then the lower strap loops. See page 6-7 for
instructions on how to attach the sling loops to different sling
bars. Lift the patient. Once the patient is lifted, the sling’s
lower edge will be placed approx. 0-10 cm (0-3.9 inch.) above
the bend in the knees.
Think about your own work posture as well as the comfort of the patient. Use the bed’s raising and lowering functions. Lower
the patient onto the bed and disconnect the sling’s strap loops from the sling bar.
Removing the Sling
Fold the sling in under itself and press it in as far under the
patient as possible.
Carefully turn the patient towards you.
Hint:
Use the sling in
order to facilitate the turn. Carefully pull away the sling.
Lifting from the Floor
