Hill-Rom 305 Manual Bed Скачать руководство пользователя страница 43

Страница: 43 / 176

2.11 The Automatic Contour Up Function Does Not Operate

Chapter 2: Troubleshooting Procedures

Hill-Rom® Basic Care™ Bed, Hill-Rom® 305 Manual Bed,

Page 2 - 21

Hill-Rom® 405 Electric Bed Service Manual (MAN336 REV 2)

2.11 The Automatic Contour Up Function Does Not Operate

1. The head section does not rise when the control for the auto contour up is

pressed.

Yes

↓

→

Go to step 4.

2. The head function lockout is off.

NOTE:

If the LED for a bed function lockout is on, the function is locked out.

Yes

↓

→

Turn the head function lockout off. If this corrects the problem,
go to “Final Actions” on page 2-4.

3. Do the procedure on page 2-6. The head section rises when the control for

the auto contour up is pressed.

Yes

↓

→

Call Hill-Rom Technical Support at 800-445-3720 (USA).

4. The knee section does not rise when the automatic contour up switch is

pressed.

Yes

↓

→

Turn the knee function lockout off. If this corrects the problem,
go to “Final Actions” on page 2-4 . Otherwise go to step 5.

NOTE:

If the LED for a bed function lockout is on, the function is locked out.

5. Do the procedure on page 2-11. If this corrects the problem, go to “Final

Actions” on page 2-4. Otherwise, call Hill-Rom Technical Support at

800-445-3720 (USA).

Содержание 305 Manual Bed

















































































































































































Результаты поиска

Содержание 305 Manual Bed

Отзывы:

Hill-Rom 305 Manual Bed, Руководство по обслуживанию, Страница: 43 / 176

Результаты поиска

Содержание 305 Manual Bed

Отзывы: