PAGE 5
POWER indicator. This LED indicates whether the product is switched on or off.
The MAIN LEVEL knob determines the overall volume of the system. Always verify that it is in
the OFF position before switching on or off the unit to avoid any unexpected thumps.
CH 1 source selector. This switch determines whether the signal of Channel 1 is taken from
the Line inputs
[11]
or
[12]
or the media player.
CH 1 AUX input. This stereo minijack input is meant for line-level audio outputs but it can also
be driven by headphone outputs.
CH 1 CD | TAPE audio input. This RCA inputs are meant for consumer level audio signals. Note
that this input is disabled when a plug is inserted into the CH 1 AUX input
[11]
.
CH 1 LEVEL control. Turning this control completely counterclockwise will reduce the respec-
tive signal to its minimum, while turning it clockwise increases the volume of the respective
signal. To avoid any unexpected thumps and other noises, always verify that it is in the OFF posi-
tion before connecting any device into audio inputs
[11]
or
[12]
and before switching on or off
the unit.
CH 2 & CH 3 LINE/MIC sensitivity switches. Depending on the signal level supplied to the audio
inputs of channel 2 and 3
[15]
, the sensitivity can be selected between Line (released position)
and Microphone (pressed position) level. If the output of the feeding source is unknown, set the
sensitivity to Line first and try whether the audio level is sufficient.
CH 2 & CH 3 Audio input. These are electronically balanced inputs that accept either ¼" TRS
or male XLR plugs. If you connect a microphone into this input, it must be a dynamic-type
microphone that does not require phantom power.
USER MANUAL - PMA1020 PRECISION 2-WAY WIRELESS ACTIVE PA SYSTEM
8
9
10
11
12
13
14
15
15
8
12
11
14
16
10
13
18
17
9
