Hilberling PT-8000, Руководство по эксплуатации

Страница: 49 / 82

PT-8000 A·B·C User Manual
C–39
Pushing STEP down will initiate the reverse process towards fine tuning
Each mode has been allocated a default tuning increment setting
AM / FM: 100 Hz
SSB / CW: 10 Hz
Changing modes will reset the current setting to the default values.
11.5 STEP-VFO Control
The STEP-VFO Control is placed in the cluster MODE. The control enables to
tune in 10 kHz, 100 kHz and 1 MHz increments.
Pushing the knob activates the STEP-VFO function:
•
A curser appears at the 100 kHz digit of the
frequency display.
Turning the knob will now tune the VFO by
100 kHz
steps. Pushing the knob
a second time will move the curser to the 10 kHz digit. Turning the knob will
result in tuning the VFO by
10 kHz
steps. Pushing the knob another time will
display the curser under the 1 MHz digit – hence tuning can now be
established by
1 MHz
steps.
Pushing the knob again will result in a movement of the curser again to the
100 kHz digit, then 1 kHz and 1 MHz again.
Neither pushing the knob nor turning the control for more than 3 seconds will
terminate the STEP-VFO function. If re-activated by pushing the knob the
cursor will be at the place used at last.
When power up the PT-8000 the curser will initially alway occur at the 100
kHz (default value) position when activating STEP-VFO.
Picture 44
Picture 45