HIKVISION W316L, Быстрый старт, Страница: 18 / 28

Ex
Explosion-proof Dome
·
Quick Start Guide
10
1. Drill four screw holes for φ16 expansion screws in the wall, and fix the installation
plate onto the wall by inserting the four M12×130 expansion screws into the wall.
Make sure that mark is at the cable outlet and is upward.
2. Insert the flag washer and the spring washer. Then tighten the four screws to secure
the installation plate as shown in Figure 2-11.
Cable Outlet
1
6
8
214
4-
Φ
16
Unit:mm
Figure 2-11 Install the Installation Plate
3. Route the cables into the bracket body. Insert three preassemble screws into the
preassemble screw holes on the cable joint (do not tighten the preassemble screws)
as shown in Figure 2-12.
Preassemble Screws
Cable Joint
Figure 2-12 Insert the Screws
4. Align the bracket with the cable joint and rotate the bracket clockwise until three
preassemble screws on the cable joint hooks onto three slots on the bracket as
shown in Figure 2-13.