HIKVISION W316L, Быстрый старт, Страница: 15 / 28

Ex
Explosion-proof Dome
·
Quick Start Guide
7
Disconnect the
cables
Do not disconnect the
CVBS and Network cables
Figure 2-4 Disconnecting the cables
2.3.2 Wall Mounting
Before you start:

Make sure that the wall is thick enough to withstand the expansion screws.

Make sure that the wall is strong enough to withstand more than eight times the
weight of the dome and the accessories.

There must be enough space for installing the explosion-proof dome and its
accessories.

Make sure the speed dome is power off before connecting the cables.
Steps:
1.
Drill four screw holes for φ16 expansion screws in the wall, and fix the installation
plate onto the wall by inserting the four M12×130 expansion screws into the wall.
Make sure that mark is upward.
2. Insert the flag washer and the spring washer. Then tighten the four screws to secure
the installation plate as shown in Figure 2-5.
Cable Outlet
168
214
Unit:mm
Grounding
Screw
Figure 2-5 Install the Installation Plate