Fixing Screw
Step 2.
Loosen the fixing screw and take apart the
enclosure.
Step 3.
Route the cable through the cable hole. (in the
cable notch)
Cable Outlet
Step 4.
Fix the base plate onto the wall with screws.
Step 5.
Install the camera onto the ceiling.
Step 6.
Make sure the enclosure is properly fixed with the
base plate.
NOTE:
Insert the clips of enclosure into the slot of the base plate.
Camera
Main Body
Base
Enclosure
Rotation Position Range
[
0° to 360°
]
Pan Position Range
[-35
° to 35°
]
Tilt Position Range
[0
° to 70°
]
Step 7.
Insert the adjustment ring into the camera
to adjust the angle of bracket position.
Step 8.
Secure the camera by install the enclosure
and fix the fixing screw.
