HIKVISION UD.6L0201B2151A02, Быстрый старт, Страница: 28 / 50

Network Box Camera
·
Quick Start Guide
27
27

Before disassembling the housing, please push aside the wiper
of the housing to the side of the front cover.

While taking out the layer board, please be careful to avoid
breaking the cable wiring between the wiper and layer board.
3. Install the lens of the camera. For detailed information of camera
lens installation, refer to 3.2. Fix the camera and the layer board
by fixing the screws, as shown below.
Fix the Camera to Layer Board Figure 3-16
4. After connecting the cables, adjust the lens focal length of the
camera to fit the surveillance scene. Insert the layer board and
camera into the housing, as shown below.
Insert into the Housing Figure 3-17