HIKVISION UD.6L0201B2151A02, Быстрый старт, Страница: 27 / 50

Network Box Camera
·
Quick Start Guide
26
26
3.3.2 Assemble the Type II Housing
Purpose:
Type II housing is equipped with heater, fan, and wiper, please refer
to the steps below for the assemble procedure of the Type II
corrosion-proof housing.
Steps:
1. Take off the front cover of corrosion-proof housing with the
supplied lever, as shown below. Loosen six AM4×10 screws on the
rear cover of the housing and take off the rear cover.
Front Cover
Lever
Rear Cover
Take Off the Housing Figure 3-14
2. Loosen the screw between the main body of housing and layer
board. Take out the layer board from the housing, as shown
below.
Housing Main Body
Layer Board
Take Off Layer Board Figure 3-15