UM DS-2CE11D8T-PIRL 061818NA
2018 Hikvision USA Inc.
2.
Drill the screw holes and the cable hole (optional) in the ceiling/wall
according to the drill template.
Figure 2, Drill Template
Note:
Drill the cable hole when using the ceiling outlet to route the cable.
Figure 3, Fix the Camera to the Ceiling
3.
Attach the bracket to the ceiling/wall, and secure the camera with supplied
screws.
Note:
•
The supplied screw package contains self-tapping screws and
expansion bolts.
•
For cement wall/ceiling, expansion bolts are required to fix the
camera. For wooden wall/ceiling, self-tapping screws are required.
4.
Route the cables through the cable hole or the side opening.
5.
Connect the corresponding power cord and video cable.
6.
Power on the camera to check whether the image on the monitor is at an
optimum angle. If not, adjust the camera according to the figure below to get
an optimum angle.
Figure 4, 3-axis Adjustment
1).
Loosen the P screw to adjust the pan position [0° to 360°]. Tighten the
screw after completing the adjustment.
2).
Loosen the T screw to adjust the tilt position [0° to 180°]. Tighten the
screw after completing the adjustment.
3).
Loosen the R screw and rotate the camera [0° to 360°]. Tighten the screw
after completing the adjustment.
Ø 55 mm
( 2.17" )
Screw Hole
Screw Hole
Screw Hole
Ø 68 mm
( 2.68" )
Ø 18 mm
( 2.68" )
Template
Side Opening
All manuals and user guides at all-guides.com