HIKVISION TurboHD DS-2CE11D8T-PERL Скачать руководство пользователя страница 2

UM DS-2CE11D8T-PIRL 061818NA 

 2018 Hikvision USA Inc. 

Regulatory Information 

FCC Information 

Please take attention that changes or modification not expressly approved 
by the party responsible for compliance could void the user’s authority to 
operate the equipment. 

FCC Compliance

: This equipment has been tested and found to comply with 

the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio frequency energy and, 
if not installed and used in accordance with the instruction manual, may 
cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference in 
which case the user will be required to correct the interference at his own 
expense. 

FCC Conditions 

This device complies with part 15 of the FCC Rules. Operation is subject to 
the following two conditions: 

1.

 

This device may not cause harmful interference. 

2.

 

This device must accept any interference received, including interference that 
may cause undesired operation. 

EU Conformity Statement 

This product and, if applicable, the supplied accessories too are 
marked with “CE” and comply therefore with the applicable 

harmonized European standards listed under the Low Voltage Directive 
2014/35/EU, the EMC Directive 2014/30/EU, 

the RoHS Directive 2011/65/EU

2012/19/EU (WEEE directive): Products marked with this symbol 
cannot be disposed of as unsorted municipal waste in the European 
Union. For proper recycling, return this product to your local supplier 
upon the purchase of equivalent new equipment, or dispose of it at 

designated collection points. For more information see: 
www.recyclethis.info.  

2006/66/EC (battery directive): This product contains a battery that 
cannot be disposed of as unsorted municipal waste in the European 
Union. See the product documentation for specific battery 

information. The battery is marked with this symbol, which may include 
lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper 
recycling, return the battery to your supplier or to a designated collection 
point. For more information see: www.recyclethis.info. 

Industry Canada ICES-003 Compliance 

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. 

Warning 

This is a class A product. In a domestic environment this product may cause 
radio interference in which case the user may be required to take adequate 
measures. 

Safety Instruction 

These instructions are intended to ensure that user can use the product 
correctly to avoid danger or property loss. 

The precaution measure is divided into “Warnings” and “Cautions”. 

Warnings: 

Serious injury or death may occur if any of the warnings are 

neglected. 

Cautions: 

Injury or equipment damage may occur if any of the cautions are 

neglected. 

 

All manuals and user guides at all-guides.com

Содержание TurboHD DS-2CE11D8T-PERL












Отзывы: