Pan Position
[0° to 360°]
P Screw
Tilt Position
[0° to 180°]
T Screw
R Screw
Rotation Position
[0° to 360°]
Figure 2-3
3-axis Adjustment
1).
Loosen the P screw to adjust the pan position [0°
to 360°]. Tighten the screw after completing the
adjustment.
2).
Loosen the T screw to adjust the tilt position [0°
to 180°]. Tighten the screw after completing the
adjustment.
3).
Loosen the R screw and rotate the camera [0° to
360°]. Tighten the screw after completing the
adjustment.
2.1.2
Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box separately.
Steps:
1.
Paste the drill template on the ceiling/wall.
2.
Drill screw holes, and the cable hole (optional) in
the ceiling/wall according to the holes of the drill
template.
Figure 2-4
Drill Template of Junction Box
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
3.
Take apart the junction box, and align the screw
holes of the bullet camera with those on the
Junction box’ cover.
4.
Fix the camera on the junction box’s cover with
supplied screws.
Junction Box
Cover
Figure 2-5
Fix the Camera on the Junction
Box’s Cover
5.
Attach the junction box body to the ceiling/wall by
aligning the screw holes of the junction box.
6.
Secure the junction box’s body with supplied screws
on the ceiling/wall.
