User Manual of PanoVu Series Network Camera
83
5.
Click on the live video to specify the four vertexes of the detection region, and right click to
complete drawing.
Repeat the step to configure other regions. You can click the
button to clear all pre-defined
regions.
Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the object which can
trigger the alarm, when the sensitivity is high, a very small object can trigger the alarm.
Detection Target: Set the detection target for the region entrance detection. You can select human,
vehicle, or all (human &vehicle) as the detection target from the dropdown list. If Human is selected,
only human beings will be identified as detection objects and as well as Vehicle.
6.
Click
tab to enter the arming schedule setting interface. The time schedule
configuration is the same as the settings of the arming schedule for motion detection. Refer to Step
5 in Section 6.1.1 Configuring Motion Detection.
7.
Click
tab to select the linkage method taken for the video loss alarm, Notify
surveillance center, send email, upload to FTP, trigger channel, smart tracking and trigger alarm
output are selectable. Refer to Step 3 in Section 6.1.1 Configuring Motion Detection.
8.
Click
to save the settings.
6.2.5
Configuring Region Exiting Detection
Purpose:
Region exiting detection function detects people, vehicle or other objects which exit from a pre-defined
virtual region, and some certain actions can be taken when the alarm is triggered.
Steps:
1.
Enter the Region Exiting Detection settings interface:
Configuration> Event > Smart Event> Region Exiting Detection
2.
Check the checkbox of Enable to enable the Region Exiting Detection function.
Figure 6-16
Configuring Region Exiting Detection
3.
Select the region from the dropdown list for detection settings.
Содержание PanoVu DS-2DP1618ZIXS-DE/440/T2
Страница 1: ...User Manual of PanoVu Series Network Camera 0 0 PanoVu Series Network Camera User Manual...
Страница 134: ...UD15124B...