User Manual of Mini Analog Speed Dome
© Hikvision . All Rights Reserved.
24
Image freeze
This feature enables the live view to switch directly from the current scene to another scene that is
defined by a preset, without showing the middle areas between these two scenes. It reduces the
use of bandwidth in a digital network system and it also provides privacy protection for the middle
areas.
You can set
IMAGE FREEZE
as
ON
or
OFF
to enable or disable this function.
Note:
The function varies according to the different camera models.
PTZ speed
Purpose:
You can define the speed of the dome movements.
(1)
DOME SPEED:
The manual movement speed of the dome can be set from level 1 to 10.
(2)
SCAN SPEED:
The scan speed defines the scan degree per second of pan scan, tilt scan, frame
scan, random scan and panoramic scan. The scan speed is adjustable from level 1 to level 40 and
the higher the level is, the faster the scan speed is.
(3)
PRESET SPEED:
The speed of calling a preset can be set from level 1 to 8. The higher level
corresponds to the faster speed to call a preset.
Limit stops
Purpose:
The limit stops are user-configurable stops which limit the panning and tilting area of the speed
dome. There are left, right, up and down limit stops to define an area.
Steps:
1.
Move the cursor to
LIMIT STOPS
and click
FOCUS+
to set it
ON
to enable this feature. Click
IRIS+
to confirm the new settings.
2.
Move the cursor to
SETTING STOPS
and click
IRIS+
. You will see the message
SET LEFT LIMIT
on
the screen.
3.
Click the direction buttons in the PTZ panel to configure the left limit stop. Click
IRIS+
to confirm
the new settings.
4.
Follow the prompts to configure the right, up and down limit stops on the menu.
Note:
The new limit stops will overwrite the existed ones by default.
5.
You can clear the defined limit stops. Click
IRIS+
to enter
CLEAR STOPS
and click
IRIS+
again to
clear the stops.
Elevation set
You can set
ELEVATION SET
as
ON
to increase the elevation angle range of the speed dome or
set it
as
OFF
to disable the function.
Note:
The range of the elevation angle is -5-90° by default and it changes to -2°-90° when the
ELEVATION SET
is set as
ON
.
3.4.2
Configuring Presets
Purpose:
Содержание Mini Analog Speed Dome
Страница 1: ...Mini Analog Speed Dome User Manual UD 6L0201D1200A01...
Страница 42: ......