HIKVISION iDS-TCS800-CI, Руководство пользователя

Страница: 27 / 74

Figure 4-3 Set Data Collection
4. Select data upload mode.
Upload Real-Time Data
The vehicle detector will upload the collected data to the server in real time.
Upload Statistics Data
The vehicle detector will upload the collected data to the server according to the set interval.
5. Select Protocol Type.
Unicoil
One coil for each lane.
6. Set the lane data collection parameters.
1) Click the lane No.
2) Enter Linked Lane No.
3) Select Lane Direction and Lane Direction Type.
4) Optional: Check lane(s) to copy the parameters of the current lane to other lane(s).
7. Draw lane lines and virtual coil areas.
1) Click Draw Area.
2) Select the lane.
3) Select the default lane lines and right border line, and drag the two end points of the line or
drag the whole line to adjust its position according to the actual scene.
4) Optional: Click Draw Lane Line to restore to the default drawing.
All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual
17