iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA
93
•
Max. Pupil Distance:
The max. pupil distance refers to the maximum square size composed by the
area between two pupils, and it is the basic standard for a camera to identify a target.
5.
Click
to draw the detection area. Draw an area by left-clicking end-points in the live view window,
and right-clicking to finish the area drawing.
6.
Click
to draw the detection line. The arrow shows entering direction, you can click
to change the
direction.
•
If the target crosses the counting area along the entering direction and crosses the detection line,
then it is counted as the entering number.
•
If the target crosses the counting area along the exiting direction and crosses the detection line,
then it is counted as the exiting number.
7.
Click
and
to draw region A and B. Make sure the two areas don't overlap. You can click
to
change the direction.
•
If the target enters from A region to B region, then it is counted as the entering number.
•
If the target enters from B region to A region, then it is counted as the exiting number.
8.
9.
Set linkage method. See
Overlay and Capture
Choose to configure capture parameters and the information you want to display on stream and picture.
•
Display VCA info. on Stream:
Display smart information on stream, including the target and rules
information.
•
Display Target info. on Alarm Picture:
Overlay the alarm picture with target information.
•
Target Picture Settings:
Custom, Head Shot, Half-Body Shot, and Full-Body Shot are selectable.
If you select
Custom
, you can customize
width
,
head height
and
body height
as required.
You can check
Fixed Value
to set the picture height.
•
Background Picture Settings:
Comparing to target picture, background picture is the scene image
offers extra environmental information. You can set the background picture quality and resolution. If
the background image needs to be uploaded to surveillance center, check Background Upload.
•
People Counting Overlay:
Select flow overlay type. Select the daily reset time. Click
Manual Reset
if
you want to reset right now.
•
Camera:
You can set
Device No.
and
Camera Info.
for the camera, which can be overlaid on captured
picture.
•
Text Overlay:
You can check desired items and adjust their order to display on captured pictures by
. The content of
Device No.
and
Camera Info
should be on the same page.