HIKVISION iDS-2CD7 G0 Series, Руководство пользователя, Страница: 60 / 108

iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 60
4) Click Save .
5) Optional: Repeat the steps above to set multiple recipients.
•
: Modify the white list parameters.
•
: Delete the white list that already set.
• Send Test SMS:
Send a message to the mobile phone for test.
4. Click Save .
Wi-Fi
Connect the device to a wireless network by setting Wi-Fi parameters.
This function is supported only by certain device models.
Connect Wi-Fi Manually
Before You Start
Refer to the user manual of wireless router or AP to set SSID, key, and other parameters.
Steps
1. Go to TCP/IP settings page:
Configuration → Network → Basic Configuration → TCP/IP
.
2. Select
Wlan
to set the parameters. Refer to
TCP/IP
for detailed configuration.
For stable use of Wi-Fi, it is not recommended to use DHCP.
3. Go to Wi-Fi settings page:
Configuration
→
Network
→
Advanced Configuration
→
Wi-Fi
.
4. Set and save the parameters.
1) Click
Search
.
2) Select a SSID , which should be the same as that of wireless router or AP. The parameters of the
network is automatically shown in Wi-Fi .
3) Select the
Network Mode
as
Manage
.
4) Input the key to connect the wireless network. The key should be that of the wireless network
connection you set on the router.
What To Do Next
Go to TCP/IP settings page:
Configuration → Network → Basic Configuration → TCP/IP
, and click
Wlan
to
check the
IPv4 Address
and log in the device. See
Login
for detailed information.
Connect Wi-Fi Automatically
The device can connect the Wi-Fi automatically via WPS or QSS protocols, which both support PBC mode
and PIN mode.