HIKVISION Hik IP Receiver Pro, Руководство пользователя, Страница: 19 / 57

Delete Partition
(Area)
Hover the cursor on the added partition (area) and click to delete
the partition (area).
What to do next
Add zone(s) and link channel(s) to zones for the partition (area). See Set Zone for details.
3.7 Set Zone
For encoding device and third-party device, only if you have set zones and linked channels to zones
can the Hik IP Receiver Pro can transmit alarms and videos from the linked channels to ARC for
verification. For AX Pro with zones and linked channels already configured on the device
configuration page, the Hik IP Receiver Pro can transmit alarms and videos once the alarm service
is enabled.
Before You Start
●
Make sure you have added at least one device to the Hik IP Receiver Pro. See Device
Management for details.
●
If you are going to link channels to devices managed by the Hik-ProConnect, make sure you have
accessed the Hik IP Receiver Pro to Hik-ProConnect. See Access Hik-ProConnect for details.
Steps
1. On the Device page, select a device and click in the Operation column.
2. Select a partition (area).
Note
Only encoding devices and third-party devices support adding a partition (area).
3. Add a zone.
Note
If you have already added the zone which needs a linkage between channels, skip this step and
just select the zone.
1) Hover the cursor on a partition (area) and click + to open the Add window.
2) Enter the zone No. and zone name.
Note
●
For encoding devices and third-party devices, you need to add zones for them on the Hik IP
Receiver Pro. Make sure the zone information you set are the same with the zone information
set on ARC, or the Hik IP Receiver Pro will fail to transmit videos from the zones-linked
channels to ARC.
●
For AX Pro, the Hik IP Receiver Pro will automatically get zone information and linked channels
configured on the device. So you do not need to add zones for AX Pros on the Hik IP Receiver
Pro.
Hik IP Receiver Pro User Manual
14